Qt-fg1601v: Sixteen image segmentation device is a new DSP digital image processing control device with independent intellectual property rights. It uses micro processing (MCPU) control technology and digital image processing (DSP) technology to process 16 video images and display them on the same monitoring screen at the same time. It is not only conducive to the centralized management and local monitoring of the video image of the security monitoring system, but also reduces the number of TV wall monitors and reduces the cost of the project. It is suitable for safe city, stadium, large command center and other occasions.
Qt-fg1601 signal divider is a 16 in one out image divider, a special high-definition image processing and control device, whose main function is to display multiple DVI image signals in full screen or multi window mode on a high-resolution display device (flat panel / projector). That is, to reduce 16 channel DVI images to 1 / 16 of the image size and place them in different positions, Thus, it can be combined into a multi screen segmentation display effect on the monitor. The high-definition DVI signal divider can accept DVI full format analog and digital signals (DVI-I), and combine the input signals into a multi window form to uniformly output SXGA / XGA signals with DVI. Each channel can accept a variety of input signals: video, S-Video, VGA, DVI-I or YPbPr interface. Any channel has a variety of / or multiplex input interfaces, which can connect multiple formats of input signals, but only one can participate in the display. The input signals are adjusted to a certain resolution and refresh frequency of DVI-I signal (XGA / 60Hz) output. The output can be connected with a variety of display devices, such as LCD, PDP, DLP and LCOS. Clear and stable image. Single full screen mode - one of the channels can be selected for full screen display; zoom in, zoom out, roam, overlay, etc.
The professional video module design can run stably for a long time and meet the work requirements of seven days a week and 24 hours a day. Because of the full hardware design architecture, the user can output stable images within 3 seconds after power on, and the user can directly hard power on and power off. The image parameters (white balance / brightness / contrast / sharpness) are automatically adjusted. All kinds of image parameters are set in the standard state when leaving the factory. Users can also adjust individual parameters according to their needs. The white balance parameters of each output image can be adjusted, so that the comprehensive white balance of the TV wall can reach the ideal state as far as possible.
