Qt-u704 series one drag four professional wireless conference microphone adopts advanced digital phase-locked loop multi-channel frequency synthesis technology. Within 50MHz frequency bandwidth, with 250kHz channel interval, it provides up to 200 channel options, which is convenient for multiple sets of machines to use at the same time, with high frequency stability; multi-level narrowband high-frequency filtering, fully eliminating interference signals. Traditional wireless microphones can't distinguish noise from human voice signal because they use low frequency noise circuit to analyze the strength of RF signal. When they are used in noisy RF environment (such as CD / VCD / LD mobile phone and other digital devices emitting a large number of harmonic signals), when the transmitter's signal is weak or closed, the noise circuit may suddenly open and the receiver will send out Strong blasting noise. To solve this problem, the company designed this professional class wireless conference microphone. Multistage narrow-band high-frequency filtering adopts the noise digital suppression circuit of high-frequency transmission and reception, which analyzes the quality of the signal rather than the strength of the signal. When the transmission signal is strong, the noise sound level of the system is low, and the receiver lets the sound pass through. When the transmission signal is weak or there is no signal, the noise sound level high suppression circuit of the system will make the receiver muffle, which has eliminated the annoyingness The possibility of blasting noise through your receiver. Easy to avoid all kinds of interference, advanced automatic frequency matching technology even if the frequency of transmitter and receiver is disordered, you only need to press it lightly, the transmitter will automatically track the receiver frequency and adjust the same, easy to use.
★ using uhf470 – 932mhz frequency band and PLL technology, the frequency can be adjusted, multiple sets can be used at the same time, without interference
★ integrated CPU general control, combined with digital LCD interface display, convenient operation and outstanding performance
★ adopt multi-stage narrowband high frequency and if frequency selective filtering to fully eliminate interference signals
★ adopt audio compression and expansion technology, greatly reduce noise and increase dynamic range
★ it has the function of suppressing and weakening the back transmission squeal, which can effectively reduce the back transmission squeal
★ the receiver adopts multi-stage high frequency amplification with high sensitivity
★ multiple noise monitoring circuit, special tone locking tone-locked system, with anti-interference characteristics
★ select good chips and parts to make the sound quality of the machine good
★ the use distance of the open space is more than 100m, and the ideal use distance is 50m
Conference microphone transmitter |
|
display |
Backlit multi-function LCD |
RF carrier range |
470 – 932mhz, region dependent |
Scope of use |
The direct viewing distance is 100m (the actual range depends on the absorption, reflection and interference of the environment to the RF signal.) |
RF carrier range |
470 – 932mhz, region dependent |
Transmitting power |
<10mW |
RF tuning step |
25 kHz (region dependent) |
Frequency Response |
30Hz–20kHz(±1dB) |
Audio dynamic range |
A-weighted (typical value), system gain @ + 10 > 120dB |
Total harmonic distortion |
- 12dB FS output, system gain @ + 10 < 0.1% |
power supply system |
Rechargeable lithium ion battery: > 15 hours / 2 × AA alkaline battery: 8 hours |
Operating temperature range |
-18 ℃ (- 0.4 ° f) to 50 ℃ (122 ° f) Note: limited by battery performance > 120dB |
Storage temperature range |
-20 ℃ (- 4 ° f) to 60 ℃ (140 ° f) Note: limited by battery performance |
Applicable occasions |
Conference room, command center, hotel, school, church, etc |
Conference microphone receiver |
|
display |
Backlit multi-function LCD |
Send / receive settings |
Channel / infrared sync |
antenna |
Detachable 1 / 2 wavelength whip antenna |
RF carrier range |
470 – 932mhz, region dependent |
Transmitting power |
<10mW |
RF tuning step |
25 kHz, region dependent |
Mirror frequency suppression |
> 70dB (typical value) |
RF sensitivity |
-96dBm at 10-5BER |
Signal delay |
<2.6ms |
Frequency Response |
30Hz–20kHz(±1dB) |
Audio dynamic range |
A-weighted (typical value), system gain @ + 10 > 120dB |
Total harmonic distortion |
- 12dB FS output, system gain @ + 10 < 0.1% |
Audio polarity |
The positive pressure on the diaphragm of the core will generate a positive voltage at the tip of the XLR output pins 2 and 6.35 |
Output impedance |
350Ω |
Number of channels |
4 channels |
Output mode |
Independent XLR output and 6.35 plug mixed output |
power supply system |
DC12~17DC,500mA~2000mA |
Operating temperature range |
-18℃(-0.4℉ to 50℃(122℉) |
Storage temperature range |
-20℃(-4℉) to 60℃(140℉) |
Rack accessories |
Rack piece × 2 |
Applicable places |
Conference room, command center, hotel, school, church, etc |